|No. of Coats||2|
|Coverage||Up to 24m² per litre|
|Size||5ml sample, 125ml, 375ml, 750ml, 2.5L, 10L|
Osmo Polyx Oil is an extremely versatile hardwax oil and forms part of the Osmo oil range of products.
Osmo Polyx Oil Clear can be tinted with colours from the Osmo Oil Stain range, up to a maximum of 10%, i.e. 250ml of Osmo Oil Stain mixed with a 2.5Ltrs of clear Polyx Oil. Special care and attention must be taken when measuring and mixing.
Before opening the 5ml sample sachets, squeeze the packet several times to ensure that the oil, wax and resins inside are thoroughly mixed.
Can also be used on many types of porous, unpolished and un-glazed interior stone and tile. The oil will darken these substrates and a test area is recommended before starting any project.
Please Note: Osmo Polyx Oil, as with any other clear wood oil will enhance the grain and character of the wood by giving it a damp like appearance. To test how the wood will look once the oil has been applied, slightly dampen the wood using a clean sponge or cloth. Never saturate wooden surfaces with water. Once dampened, the wood must be allowed to fully dry before applying the oil.
Osmo have made a change to the name of their 3032 product in this range. It was called 'Satin Matt' and is now called 'Satin'. The product however remains the same. The 125ml labels can sometimes be printed in German.
Surfaces must be clean and dry, removing all traces of dust and dirt before application (maximum moisture content 20%). Only apply on frost free surfaces. For guaranteed performance, it is always recommended to remove all traces of a previous finish.
We always recommend applying a test area to ascertain drying times and effect. Osmo Polyx-Oil is ready-to-use from the tin, do not thin. Stir thoroughly prior to application. Osmo oils dry via oxidation so it is important to ensure good ventilation during application and drying.
The ideal application tool is a firm, fine, natural bristled brush, however the key to a great finish is thin application with removal of any surplus.
Cork tiles are best treated before fitting to avoid overlapping treatment of edges which would lead to prolonged drying times. A cork floor treated with Osmo Polyx-Oil will get a robust, elastic and wear-resistant surface which will harden further over 2-3 weeks. Due to the extreme absorption power of this highly elastic, natural, material we recommend the following procedure:
For daily maintenance a duster, mop or vacuum cleaner will be sufficient. For commercial premises, an electric floor polisher can be used.
Please Note: Oiled or waxed surfaces should not be cleaned with a steam cleaner or steam mop as this degrades the performance of the finish.
Renovating, even partially, is easy. Just clean and re-treat worn areas with a thin coat of Osmo Polyx Oil. No sanding is required, and no removal of a previous Polyx Oil finish. No repair marks will be visible if applied thinly and appropriately.
Osmo Maintenance Oil can also be used for maintaining and changing the gloss level of surfaces treated with Osmo Polyx Oil.