|No. of Coats||2|
|Coverage||Up to 24m² per litre|
|Size||125ml, 750ml, 2.5L, 10L|
Osmo Polyx Oil Rapid is perfect for all types of wooden floors and can also be used on cork floors, terracotta and other unglazed tiles. It is also well suited for the treatment of wooden furniture surfaces.
Osmo Polyx Oil Rapid can also be tinted with colours from the Osmo Oil Stain range, up to a maximum of 10%, i.e. 250ml of Osmo Oil Stain mixed with 2.5Ltrs of Osmo Polyx Oil Rapid. Special care and attention must be taken when measuring and mixing.
Ensure that wooden surfaces are clean, dry and free from dust, dirt, debris and any other contaminants prior to applying Osmo Polyx-Oil Rapid.
Always do a small test area before starting any project and follow the manufacturer's instructions on the tin at all times. Osmo Polyx Oil Rapid is ready to use but must be stirred thoroughly prior to application. Do not thin.
The ideal application tool is a firm, fine, natural bristled brush, however the key to a great finish is thin application with removal of any surplus.
Cork tiles are best treated before fitting to avoid overlapping treatment of edges which would lead to prolonged drying times. A cork floor treated with Osmo Polyx-Oil Rapid will get a robust, elastic and wear-resistant surface which will harden further over 2-3 weeks. Due to the extreme absorption power of this highly elastic, natural, material we recommend the following procedure:
For daily maintenance a duster, mop or vacuum cleaner will be sufficient. For commercial premises, an electric floor polisher can be used.
Please Note: Oiled or waxed surfaces should not be cleaned with a steam cleaner or steam mop as this degrades the performance of the finish.
Renovating, even partially, is easy. Just clean and re-treat worn areas with a thin coat of Osmo Polyx Oil Rapid. No sanding is required, and no removal of a previous Polyx Oil finish. No repair marks will be visible if applied thinly and appropriately.
Osmo Maintenance Oil can also be used for maintaining and changing the gloss level of surfaces treated with Osmo Polyx Oils.