Panssarimaali

£16.13

Size
Base
Colour Type
Quantity
  • Product Description

      Quick drying semi-gloss alkyd anti-corrosive single pack coating for steel, cladding and roofing

      Alkyd semi-gloss paint for use on cladding and sheet metal. Panssari offers superb weather resistance, colour stability and an extremely durable finish which protects against attack from chemical and biological erosion. Panssari contains active anti-corrosive pigments and can be applied as a primer finish to bare and rusted surfaces. 

      Examples of use:

      New or previously painted interior and exterior cladding and roof sheets, steel, UPVC, gutters drain pipes. Panssari can be applied directly onto surfaces previously painted with alkyd or acrylic paints and industrially coated steel sheets (PVC, PURAL, POLYESTER, PVDF, Plastisol).

      Excellent anti corrosive properties with great adhesion to steel, aluminium and galvanized surfaces

       

      Base paints

      A and C

      Colour Range

      Tikkurila colour cards for Metal Roofs and Wooden Facades.
      Standard colours: Black (0202), Old Copper (0296), Iron Red (0384), Grass (0357)

      Gloss grade

      Semi-gloss

      Coverage

      8-12 m2/l.

      Can sizes

      Base paints A and C: 0,9 l, 2,7 l, 9 l, 18 l
      Standard colours: 1 l, 3 l, 10 l, 20 l.

      Thinner

      White Spirit 1050

      Mixing ratio

      If necessary thin up to 5% with White Spirit 1050.

      Application method

      Methods: Brush or spray. Apply preferably by brush, also roller and spray application. On roller application smoothing immediately by brush. On spray application use airless spray nozzle 0,011"-0,015" (angle normally 40 °C) and the product is thinned max. 10 vol-%, when needed.

       

      Drying time at 23°C and 50% relative air humidity

      Touch dry after 3-5 hours, repainting is recommended to be made on the next day.

      Wear resistance

      Good

      Weather resistance

      Good, also in industrial and maritime atmosphere.
      The paint surface will gradually become matt due to the effects of the weather.

      Chemical resistance

      Resists Turpentine, White Spirit and Methylated spirit, does not resist e.g. Thinner.

      Heat resistance

      80 °C, ISO 4211-3.

      Oil and grease resistance

      Resists lubricating oils and greases

      Solids volume

      approx. 55%

      Density

      1,0 - 1,3 kg/l depending on shade, ISO 2811

      Product code

      400_6001/3

      APPLICATION DETAILS

      Application conditions

      The surface to be painted must be dry, the temperature of the air at least +5 °C, and the relative humidity of the air below 80 % during painting and drying.

      Please note: The temperature of the surface may not exceed +40oC, otherwise the solvent will evaporate too quickly. This may cause e.g. porosity, bubbling and weakened adhesion. Plan the painting so that the paint film has enough time to dry before the evening dew. Dew dims the paint surface.

      Please note: The temperature of the surface may not exceed +40 °C, otherwise the solvent will evaporate too quickly. This may cause e.g. porosity, bubbling and weakened adhesion. Plan the painting so that the paint film has enough time to dry before the evening dew.

      Preparation

      Unpainted surfaces:
      New zinc-coated sheet metal surfaces are recommended to be painted at the earliest on the following year. Best adhesion is achieved to already faded, mechanically or chemically roughened zinc-coated surface.
      Remove possible white rusty/rusty parts with a scraper and steel brush (to St2 degree). Remove water soluble white rust protective agent, dirt, water soluble salts, greases and oils from the surface with Panssaripesu Roof Cleaning Agent and brush. Rinse carefully with water and allow to dry well. Roughen the aluminium surfaces before painting.
      Prime the entire surface with Rostex Super Metal Primer. Finish with 1 to 2 coats of Panssarimaali depending on the coverage. Single coat is normally sufficient, if the dry film thickness of Panssarimaali is 40-60 µm. Rostex Super can be top-coated with Panssarimaali after couple of hours. Painting should be done latest after 4 days from priming. Otherwise the primed surface has to roughened matt, rinsed carefully and allowed to dry before painting.

      Previously painted surfaces:
      Remove loose paint and possible rust with a scraper and steel brush (to St2 degree). If the flaking is heavy, it means that the adhesion of the old paint is thoroughly bad. In this case the old paint has to be removed carefully (e.g. with a scraper, steel brush, high pressure washing or pressure washing with addition of sand). Clean the surface with Panssaripesu Roof Cleaning Agent using a brush, rinse carefully with water and allow to dry. Prime bare metal areas with Rostex Super Metal Primer. Finish with 1 to 2 coats of Panssarimaali.

      Painting

      Stir Panssarimaali carefully before use and thin with White Spirit 1050 (0-5%), if necessary. Apply Panssarimaali preferably by brush, or alternatively by roller or spray. After rolling finish with a brush. The recommended dry-film thickness for a single coat is 40-60 µm (micrometer). Reserve enough paint for one uniform surface, and stir into one canister to avoid possible colour differences. Note! Do not use the colour made from C-base side by side with a correspondent standard colour. The slipperiness of the surface can be reduced by adding Non-slip (anti-skid material) powder into the paint (1/3 l into 10 l of paint). Apply two coats of paint when using Non-slip, so that the second coat includes the anti-skid material. The slipperiness of the surface can be reduced by adding Non-slip (anti-skid material) powder into the paint (150 g/10 ltr). Apply two coats of paint when using Non-slip, so that the second coat includes the anti-skid material.

      Cleaning of tools

      Clean tools with White Spirit 1050 or with Tikkurila Pensselipesu (Tool cleaner)

      Maintenance instructions

      Handle the surface with care, ultimate durability and hardness is reached in approx. a moth under normal circumstances. If cleansing is needed, use a soft brush, a mop or a damp cleaning cloth.
      After 1 month the surface can be cleansed with Huoltopesu (mixing ratio: 1 part of Huoltopesu to 10 parts of water).
      Clean soiled surfaces and stains with Huoltopesu (1:1). Rinse the surface carefully after maintenance and let it get dry.

      Maintenance treatment

      Panssarimaali can be repainted with Panssarimaali or other alkyd-based paint meant for metal roofs. Panssarimaali can also be repainted with Panssari Akva.

      EU VOC 2004/42/EC-limit value

      (cat A/i) 500g/l(2010) Panssarimaali contains VOC max. 500g/l.

  • Product Details

    • Variant: 0.9L / A / White
    • SKU: 46060010110
    • In Stock: 3
    • Weight: 0.0 kg
    • Product Type: Paint
    • Brand: Tikkurila