Tikkurila Finngard Silicone

SKU 100175
£14.21 inc VAT
Colour Type
Product Information

Water-based, matt acrylic masonry paint for use on new and previously painted surfaces where a matt decorative finish is required.

Finngard Silicone Protect is highly moisture vapor permeable.

Suitable for new or previously painted exterior façades including roughcast, pebbledash, concrete, cement, lime rendering, building blocks and boards, mineral and dispersion coatings.

Application by brush, spray or roller, Finngard Silicone Protect is touch dry under normal conditions in 2 hours and re-coatable after 8 hours.

Please Note
Finngard Silicone Protect is not recommended for use on surfaces previously coated with elastomeric coatings.

More Information

More Information
For Interior or Exterior Use Exterior
Surface Masonry
Product Category Topcoat
Sheen Level Matt (6-10%)
Product Certifications CE
VOC Levels Ultra Low (5-49 g/l)
Brand Tikkurila
Application Method Airless, Spray, Brush, Roller
Theoretical Cover Rate 6-9 m2/l per one coat. See TDS for full details
Thinner Water
Waterbased or Solventbased Water
Minimum content Minimum contents are the can size less 10%
Single Pack or 2 pack Single Pack
Product Segment Decorative
SD value 0.06

Product Attachments

Finngard Silicone Protect MSDS(130.33 kB)

Finngard Silicone Protect TDS(2.34 MB)


Have a question about this product? Don’t hesitate to get in touch with one of our knowledgeable staff.

Our colour range
Please select a colour range to view available colours

Getting colours...