Rubio Monocoat – Oil 2C (comp A only)

SKU 100884
£15.48 inc VAT
Product Information

Are you looking for a natural floorboard oil, excellent hardwood oil or just an economical wood floor oil? Then you’re in luck! Because Rubio Monocoat Oil Plus 2C is all these three, and even more… Rubio Monocoat Oil Plus 2C is a wood protector that colours and protects in only 1 single layer! It protects wood from water, heat and the daily wear & tear. It is the best oil for wood furniture, hardwood flooring, oak tables, just anything that is made out of wood!

Rubio® Monocoat Oil Plus 2C is a product of the newest generation which colours your wood and protects it in one layer. The combination of the oil (A) and the accelerator (B) guarantees a quick drying (100ml is Part A only).  Due to its advanced molecular bonding technology, Rubio Monocoat Oil Plus 2C has the following qualities:

  • Available in multiple standard colours and trendcolours.
  • Enhances the natural look and feel of the wood.
  • 0% VOC, does not contain any water or solvents.
  • Easy to maintain.
  • It’s a natural wood floor finish because the oil is made of linseed.
  • No overlaps or starting marks.
  • Minimal use/High coverage: 30 – 50 m²/L (300 – 500 ft²/L.)
  • Can be applied to all wood types.
  • Certified
  • Very wear-resistant.
  • Water- and heat-resistant, ideal for kitchens and bathrooms.
  • Very fast curing: 80% in 2 days.
  • A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.
  • Packaging: includes 350 ml, 1.3 L.




  • STEP 1. Untreated wood: sand the surface scratch-free. Vacuum thoroughly, eliminate remains of dust with RMC Cleaner.
  • STEP 2. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.
  • STEP 3. Once the cleaned surface is dry, spread out a small quantity of RMC Oil Plus 2C (cloth or polishing machine with thin beige
    pad). Work in zones of 5 – 10 m2.
  • STEP 4. Let absorb during a few minutes. Thoroughly remove all excess of oil (cloth or polishing machine with white pad) within
    15 minutes per zone. The surface should feel dry! Finish all zones the same way.
  • STEP 5. In a well ventilated room, the surface can be used 24 – 36 hours after the application.


After 5 days a treatment with water and RMC products can be applied.
In order to guarantee a long lifespan and protection, the use of Rubio® Monocoat maintenance products is imperative.

30 – 50 m2/L, depending on the wood type, sanding and application method. RMC Oil Plus 2C may be used for a maximum of 4 – 6 hours after mixing.
These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.


Tips & tricks
∙ The product may NOT be diluted!
∙ Stir the product well before application. When using several containers at one site, it is recommended to mix them for an even result.


ATTENTION: Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.


Have a question about this product? Don’t hesitate to get in touch with one of our knowledgeable staff.

Our colour range
Please select a colour range to view available colours

Getting colours...